依必安派特公司于1963年在德国成立。作为在电机和风机产业领域的技术领导者之一, 依必安派特拥有55家分支机构在世界各地为客户提供专
业地风机及电动机的解决方案与服务。 |
 |
 如何选型
请将技术要求，应用场合以如下方式发送给我们
如何订购
品牌、产品型号、订货号、型号部分铭牌图、需要数量以如下方式发送给我们
Email询价更迅捷: info@zzindustry.net
FAX询价更迅捷: 021-35505908转11 |
|
|
|
 |
|
Axial fans
|
| |
 |
|
|
|
W3G630-GD03-A1
|
|
|
EC axial fan - HyBlade
Motor: M3G084-GF
|
|
| Technical description |
|
| |
|
|
|
|
| |
Surface of rotor |
|
Coated in black |
|
|
| |
Material of blades |
|
Press-fitted sheet steel blank, sprayed with PP plastic |
|
|
| |
Material of wall ring |
|
Sheet steel, pre-galvanised and coated in black plastic (RAL 9005) |
|
|
| |
Material of guard grille |
|
Steel, coated in black plastic (RAL9005) |
|
|
|
|
| |
Direction of air flow |
|
"V" |
|
|
| |
Direction of rotation |
|
Counter-clockwise, seen on rotor |
|
|
| |
Type of protection |
|
IP 54 / Depending on installation and position |
|
|
|
|
|
|
| |
Max. permissible ambient motor temp. (transp./ storage) |
|
+ 80 °C |
|
|
| |
Min. permissible ambient motor temp. (transp./storage) |
|
- 40 °C |
|
|
| |
Mounting position |
|
Shaft horizontal or rotor on bottom; rotor on top on request |
|
|
| |
Condensate discharge holes |
|
Rotor-side |
|
|
|
|
| |
Motor bearing |
|
Ball bearing |
|
|
| |
Technical features |
|
- Output 10 VDC, max. 10 mA - Alarm relay - Motor current limit - PFC, active - Soft start - Control input 0-10 VDC / PWM - Control interface with SELV potential safely disconnected from the mains - Over-temperature protected electronics / motor - Line undervoltage / phase failure detection |
|
|
| |
EMC interference immunity |
|
Acc. to EN 61000-6-2 (industrial environment) |
|
|
| |
EMC harmonics |
|
Acc. to EN 61000-3-2/3 |
|
|
| |
EMC interference emission |
|
Acc. to EN 55022 (Class B, household environment) |
|
|
| |
Touch current acc. IEC 60990 (measuring network Fig. 4, TN system) |
|
<= 3,5 mA |
|
|
| |
Motor protection |
|
Thermal overload protector (TOP) wired internally |
|
|
|
|
| |
Protection class |
|
I (if protective earth is connected by customer) |
|
|
| |
Product conforming to standard |
|
EN 61800-5-1 |
|
|
|
| |
| |
|
|
|
|
| |
Ebm-Papst Mulfingen GmbH & Co. KG
公司简介
